Nov 12 21:49:31 builld-jv syslogd: kernel boot file is /boot/kernel/kernel ID: 0x00000000 VER: 0x00050014 LDR: 0x01000000 DFR: 0x0fffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00000200 err: 0x00010000 pcm: 0x00010000 wlan: <802.11 Link Layer> random: nfslock: pseudo-device mem: Pentium Pro MTRR support enabled io: null: npx0: [FAST] npx0: on motherboard npx0: INT 16 interface acpi0: on motherboard acpi0: [MPSAFE] pci_open(1): mode 1 addr port (0x0cf8) is 0x8000f904 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=25318086) pcibios: BIOS version 2.10 Found $PIR table, 19 entries at 0xc00fde90 PCI-Only Interrupts: none Location Bus Device Pin Link IRQs embedded 1 0 A 0x60 3 4 5 7 10 11 12 14 15 embedded 1 0 B 0x61 3 4 5 7 10 11 12 14 15 slot 4 3 5 A 0x6a 3 4 5 7 10 11 12 14 15 slot 4 3 5 B 0x6a 3 4 5 7 10 11 12 14 15 slot 4 3 5 C 0x6a 3 4 5 7 10 11 12 14 15 slot 4 3 5 D 0x6a 3 4 5 7 10 11 12 14 15 slot 5 3 4 A 0x6a 3 4 5 7 10 11 12 14 15 slot 5 3 4 B 0x6a 3 4 5 7 10 11 12 14 15 slot 5 3 4 C 0x6a 3 4 5 7 10 11 12 14 15 slot 5 3 4 D 0x6a 3 4 5 7 10 11 12 14 15 embedded 3 8 A 0x6b 3 4 5 7 10 11 12 14 15 embedded 3 8 B 0x63 3 4 5 7 10 11 12 14 15 slot 1 4 10 A 0x61 3 4 5 7 10 11 12 14 15 slot 1 4 10 B 0x62 3 4 5 7 10 11 12 14 15 slot 1 4 10 C 0x63 3 4 5 7 10 11 12 14 15 slot 1 4 10 D 0x68 3 4 5 7 10 11 12 14 15 slot 2 4 6 A 0x62 3 4 5 7 10 11 12 14 15 slot 2 4 6 B 0x63 3 4 5 7 10 11 12 14 15 slot 2 4 6 C 0x68 3 4 5 7 10 11 12 14 15 slot 2 4 6 D 0x69 3 4 5 7 10 11 12 14 15 slot 3 4 9 A 0x63 3 4 5 7 10 11 12 14 15 slot 3 4 9 B 0x68 3 4 5 7 10 11 12 14 15 slot 3 4 9 C 0x69 3 4 5 7 10 11 12 14 15 slot 3 4 9 D 0x6a 3 4 5 7 10 11 12 14 15 embedded 4 13 A 0x69 3 4 5 7 10 11 12 14 15 embedded 0 31 D 0x63 3 4 5 7 10 11 12 14 15 embedded 0 31 B 0x61 3 4 5 7 10 11 12 14 15 embedded 0 31 B 0x61 3 4 5 7 10 11 12 14 15 AcpiOsDerivePciId: bus 0 dev 31 func 0 AcpiOsDerivePciId: bus 0 dev 31 func 0 acpi0: Power Button (fixed) AcpiOsDerivePciId: bus 0 dev 0 func 0 AcpiOsDerivePciId: bus 0 dev 31 func 0 pci_link0: irq 10 on acpi0 pci_link0: Links after initial probe: Index IRQ Rtd Ref IRQs 0 10 N 0 3 4 5 6 7 9 10 11 14 15 pci_link0: Links after initial validation: Index IRQ Rtd Ref IRQs 0 10 N 0 3 4 5 6 7 9 10 11 14 15 pci_link0: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 9 10 11 14 15 pci_link1: irq 11 on acpi0 pci_link1: Links after initial probe: Index IRQ Rtd Ref IRQs 0 11 N 0 3 4 5 6 7 9 10 11 14 15 pci_link1: Links after initial validation: Index IRQ Rtd Ref IRQs 0 11 N 0 3 4 5 6 7 9 10 11 14 15 pci_link1: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 9 10 11 14 15 pci_link2: irq 0 on acpi0 pci_link2: Links after initial probe: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 9 10 11 14 15 pci_link2: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 9 10 11 14 15 pci_link2: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 9 10 11 14 15 pci_link3: irq 5 on acpi0 pci_link3: Links after initial probe: Index IRQ Rtd Ref IRQs 0 5 N 0 3 4 6 7 9 10 11 14 15 pci_link3: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 6 7 9 10 11 14 15 pci_link3: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 6 7 9 10 11 14 15 pci_link4: irq 11 on acpi0 pci_link4: Links after initial probe: Index IRQ Rtd Ref IRQs 0 11 N 0 3 4 5 6 7 9 10 11 14 15 pci_link4: Links after initial validation: Index IRQ Rtd Ref IRQs 0 11 N 0 3 4 5 6 7 9 10 11 14 15 pci_link4: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 9 10 11 14 15 pci_link5: irq 11 on acpi0 pci_link5: Links after initial probe: Index IRQ Rtd Ref IRQs 0 11 N 0 3 4 5 6 7 9 10 11 14 15 pci_link5: Links after initial validation: Index IRQ Rtd Ref IRQs 0 11 N 0 3 4 5 6 7 9 10 11 14 15 pci_link5: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 9 10 11 14 15 pci_link6: irq 11 on acpi0 pci_link6: Links after initial probe: Index IRQ Rtd Ref IRQs 0 11 N 0 3 4 5 6 7 9 10 11 14 15 pci_link6: Links after initial validation: Index IRQ Rtd Ref IRQs 0 11 N 0 3 4 5 6 7 9 10 11 14 15 pci_link6: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 9 10 11 14 15 pci_link7: irq 11 on acpi0 pci_link7: Links after initial probe: Index IRQ Rtd Ref IRQs 0 11 N 0 3 4 5 6 7 9 10 11 14 15 pci_link7: Links after initial validation: Index IRQ Rtd Ref IRQs 0 11 N 0 3 4 5 6 7 9 10 11 14 15 pci_link7: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 9 10 11 14 15 ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 cpu0: on acpi0 cpu1: on acpi0 pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 pci0: physical bus=0 found-> vendor=0x8086, dev=0x2531, revid=0x04 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0146, statreg=0x2090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 3, range 32, base f4000000, size 26, enabled found-> vendor=0x8086, dev=0x2532, revid=0x04 bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x00a0, cachelnsz=0 (dwords) lattimer=0x60 (2880 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2533, revid=0x04 bus=0, slot=2, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x00a0, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x244e, revid=0x04 bus=0, slot=30, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0147, statreg=0x0080, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2440, revid=0x04 bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x010f, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x244b, revid=0x04 bus=0, slot=31, func=1 class=01-01-80, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 000010e0, size 4, enabled found-> vendor=0x8086, dev=0x2442, revid=0x04 bus=0, slot=31, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=5 map[20]: type 4, range 32, base 000010c0, size 5, enabled pcib0: matched entry for 0.31.INTD pcib0: slot 31 INTD hardwired to IRQ 19 found-> vendor=0x8086, dev=0x2443, revid=0x04 bus=0, slot=31, func=3 class=0c-05-00, hdrtype=0x00, mfdev=0 cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 map[20]: type 4, range 32, base 000010f0, size 4, enabled pcib0: matched entry for 0.31.INTB pcib0: slot 31 INTB hardwired to IRQ 17 found-> vendor=0x8086, dev=0x2445, revid=0x04 bus=0, slot=31, func=5 class=04-01-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 map[10]: type 4, range 32, base 00001400, size 8, enabled map[14]: type 4, range 32, base 00001080, size 6, enabled pcib0: matched entry for 0.31.INTB pcib0: slot 31 INTB hardwired to IRQ 17 agp0: mem 0xf4000000-0xf7ffffff at device 0.0 on pci0 agp0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0xf4000000 agp0: allocating GATT for aperture of size 64M pcib1: at device 1.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0x2000-0x2fff pcib1: memory decode 0xf0000000-0xf00fffff pcib1: prefetched decode 0xf8000000-0xfbffffff pci1: on pcib1 pci1: physical bus=1 found-> vendor=0x1002, dev=0x5446, revid=0x00 bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0287, statreg=0x02b0, cachelnsz=8 (dwords) lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D1 D3 current D0 map[10]: type 3, range 32, base f8000000, size 26, enabled pcib1: (null) requested memory range 0xf8000000-0xfbffffff: good map[14]: type 4, range 32, base 00002000, size 8, enabled pcib1: (null) requested I/O range 0x2000-0x20ff: in range map[18]: type 1, range 32, base f0000000, size 14, enabled pcib1: (null) requested memory range 0xf0000000-0xf0003fff: good pcib1: matched entry for 1.0.INTA pcib1: slot 0 INTA hardwired to IRQ 16 pci1: at device 0.0 (no driver attached) pcib2: at device 2.0 on pci0 pcib2: secondary bus 2 pcib2: subordinate bus 3 pcib2: I/O decode 0x3000-0x3fff pcib2: memory decode 0xf0100000-0xf01fffff pcib2: prefetched decode 0xfff00000-0xfffff pcib2: could not get PCI interrupt routing table for \_SB_.PCI0.HLB_ - AE_NOT_FOUND pci2: on pcib2 pci2: physical bus=2 found-> vendor=0x8086, dev=0x1360, revid=0x03 bus=2, slot=31, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0020, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x80 (32000 ns) pcib3: at device 31.0 on pci2 pcib3: secondary bus 3 pcib3: subordinate bus 3 pcib3: I/O decode 0x3000-0x3fff pcib3: memory decode 0xf0100000-0xf01fffff pcib3: prefetched decode 0xfff00000-0xfffff pci3: on pcib3 pci3: physical bus=3 found-> vendor=0x8086, dev=0x1161, revid=0x01 bus=3, slot=0, func=0 class=08-00-20, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 1, range 32, base f0104000, size 12, enabled pcib3: (null) requested memory range 0xf0104000-0xf0104fff: good pcib2: (null) requested memory range 0xf0104000-0xf0104fff: good found-> vendor=0x1000, dev=0x0021, revid=0x01 bus=3, slot=8, func=0 class=01-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0117, statreg=0x0230, cachelnsz=8 (dwords) lattimer=0xff (7650 ns), mingnt=0x11 (4250 ns), maxlat=0x12 (4500 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 4, range 32, base 00003000, size 8, enabled pcib3: (null) requested I/O range 0x3000-0x30ff: in range pcib2: (null) requested I/O range 0x3000-0x30ff: in range map[14]: type 1, range 64, base f0105000, size 10, enabled pcib3: (null) requested memory range 0xf0105000-0xf01053ff: good pcib2: (null) requested memory range 0xf0105000-0xf01053ff: good map[1c]: type 1, range 64, base f0100000, size 13, enabled pcib3: (null) requested memory range 0xf0100000-0xf0101fff: good pcib2: (null) requested memory range 0xf0100000-0xf0101fff: good pcib3: matched entry for 3.8.INTA pcib3: slot 8 INTA hardwired to IRQ 23 found-> vendor=0x1000, dev=0x0021, revid=0x01 bus=3, slot=8, func=1 class=01-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0117, statreg=0x0230, cachelnsz=8 (dwords) lattimer=0xff (7650 ns), mingnt=0x11 (4250 ns), maxlat=0x12 (4500 ns) intpin=b, irq=5 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 4, range 32, base 00003400, size 8, enabled pcib3: (null) requested I/O range 0x3400-0x34ff: in range pcib2: (null) requested I/O range 0x3400-0x34ff: in range map[14]: type 1, range 64, base f0105400, size 10, enabled pcib3: (null) requested memory range 0xf0105400-0xf01057ff: good pcib2: (null) requested memory range 0xf0105400-0xf01057ff: good map[1c]: type 1, range 64, base f0102000, size 13, enabled pcib3: (null) requested memory range 0xf0102000-0xf0103fff: good pcib2: (null) requested memory range 0xf0102000-0xf0103fff: good pcib3: matched entry for 3.8.INTB pcib3: slot 8 INTB hardwired to IRQ 19 pci3: at device 0.0 (no driver attached) sym0: <1010-66> port 0x3000-0x30ff mem 0xf0105000-0xf01053ff,0xf0100000-0xf0101fff irq 23 at device 8.0 on pci3 sym0: Reserved 0x400 bytes for rid 0x14 type 3 at 0xf0105000 sym0: Reserved 0x2000 bytes for rid 0x1c type 3 at 0xf0100000 sym0: Symbios NVRAM, ID 7, Fast-80, LVD, parity checking sym0: open drain IRQ line driver, using on-chip SRAM sym0: using LOAD/STORE-based firmware. sym0: handling phase mismatch from SCRIPTS. sym0: initial SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex) 00/4e/a0/01/00/04 sym0: final SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex) 00/4e/80/01/08/04 sym0: [GIANT-LOCKED] sym0: enabling clock multiplier sym0: Downloading SCSI SCRIPTS. sym1: <1010-66> port 0x3400-0x34ff mem 0xf0105400-0xf01057ff,0xf0102000-0xf0103fff irq 19 at device 8.1 on pci3 sym1: Reserved 0x400 bytes for rid 0x14 type 3 at 0xf0105400 sym1: Reserved 0x2000 bytes for rid 0x1c type 3 at 0xf0102000 sym1: Symbios NVRAM, ID 7, Fast-80, LVD, parity checking sym1: open drain IRQ line driver, using on-chip SRAM sym1: using LOAD/STORE-based firmware. sym1: handling phase mismatch from SCRIPTS. sym1: initial SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex) 00/4e/a0/01/00/04 sym1: final SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex) 00/4e/80/01/08/04 sym1: [GIANT-LOCKED] sym1: enabling clock multiplier sym1: Downloading SCSI SCRIPTS. pcib4: at device 30.0 on pci0 pcib4: secondary bus 4 pcib4: subordinate bus 5 pcib4: I/O decode 0x4000-0x5fff pcib4: memory decode 0xf0200000-0xf03fffff pcib4: prefetched decode 0xfff00000-0xfffff pcib4: Subtractively decoded bridge. pci4: on pcib4 pci4: physical bus=4 found-> vendor=0x104c, dev=0xac50, revid=0x01 bus=4, slot=6, func=0 class=06-07-00, hdrtype=0x02, mfdev=0 cmdreg=0x0000, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x40 (16000 ns), maxlat=0x03 (750 ns) intpin=a, irq=255 powerspec 1 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base 00000000, size 12, memory disabled found-> vendor=0x1011, dev=0x0024, revid=0x03 bus=4, slot=9, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0x21 (990 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) found-> vendor=0x1106, dev=0x3044, revid=0x46 bus=4, slot=10, func=0 class=0c-00-10, hdrtype=0x00, mfdev=0 cmdreg=0x0117, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x20 (8000 ns) intpin=a, irq=11 powerspec 2 supports D0 D2 D3 current D0 map[10]: type 1, range 32, base f0221000, size 11, enabled pcib4: (null) requested memory range 0xf0221000-0xf02217ff: good map[14]: type 4, range 32, base 00004000, size 7, enabled pcib4: (null) requested I/O range 0x4000-0x407f: in range pcib4: matched entry for 4.10.INTA pcib4: slot 10 INTA hardwired to IRQ 17 found-> vendor=0x8086, dev=0x1229, revid=0x0c bus=4, slot=13, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0117, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base f0220000, size 12, enabled pcib4: (null) requested memory range 0xf0220000-0xf0220fff: good map[14]: type 4, range 32, base 00004080, size 6, enabled pcib4: (null) requested I/O range 0x4080-0x40bf: in range map[18]: type 1, range 32, base f0200000, size 17, enabled pcib4: (null) requested memory range 0xf0200000-0xf021ffff: good pcib4: matched entry for 4.13.INTA pcib4: slot 13 INTA hardwired to IRQ 21 cbb0: at device 6.0 on pci4 pcib4: cbb0 requested memory range 0xf0200000-0xf03fffff: good cbb0: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0xf0222000 cbb0: Found memory at f0222000 cbb0: Secondary bus is 0 cbb0: Setting primary bus to 4 cbb0: Secondary bus set to 5 subbus 6 cbb0: WARNING: cannot attach cardbus bus! pccard0: <16-bit PCCard bus> on cbb0 pcib4: matched entry for 4.6.INTA pcib4: slot 6 INTA hardwired to IRQ 18 cbb0: [MPSAFE] cbb0: PCI Configuration space: 0x00: 0xac50104c 0x02100007 0x06070001 0x00022000 0x10: 0xf0222000 0x020000a0 0x20060504 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 0x30: 0x00000000 0xfffffffc 0x00000000 0x07400112 0x40: 0x00000000 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x0044b060 0x00000000 0x00000000 0x00000022 0x90: 0x616600c0 0x00000000 0x00000000 0x00000000 0xa0: 0xfe110001 0x00c00000 0x00000015 0x0000001b 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 pcib5: at device 9.0 on pci4 pcib5: secondary bus 5 pcib5: subordinate bus 5 pcib5: I/O decode 0x5000-0x5fff pcib5: memory decode 0xf0300000-0xf03fffff pcib5: prefetched decode 0xfff00000-0xfffff pci5: on pcib5 pci5: physical bus=5 fwohci0: port 0x4000-0x407f mem 0xf0221000-0xf02217ff irq 17 at device 10.0 on pci4 fwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0xf0221000 fwohci0: [MPSAFE] fwohci0: OHCI version 1.0 (ROM=1) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:11:06:00:00:00:b4:8c fwohci0: Phy 1394a available S400, 3 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: on fwohci0 fwe0: on firewire0 if_fwe0: Fake Ethernet address: 02:11:06:00:b4:8c fwe0: bpf attached fwe0: Ethernet address: 02:11:06:00:b4:8c fwe0: if_start running deferred for Giant sbp0: on firewire0 fwohci0: Initiate bus reset fwohci0: node_id=0xc800ffc1, gen=1, CYCLEMASTER mode firewire0: 2 nodes, maxhop <= 1, cable IRM = 1 (me) firewire0: bus manager 1 (me) fxp0: port 0x4080-0x40bf mem 0xf0220000-0xf0220fff,0xf0200000-0xf021ffff irq 21 at device 13.0 on pci4 fxp0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xf0220000 fxp0: using memory space register mapping fxp0: PCI IDs: 8086 1229 103c 1274 000c fxp0: Dynamic Standby mode is disabled miibus0: on fxp0 inphy0: on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp0: bpf attached fxp0: Ethernet address: 00:e0:81:00:7b:8f fxp0: [MPSAFE] isab0: at device 31.0 on pci0 isa0: on isab0 atapci0: port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x10e0-0x10ef at device 31.1 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x10e0 ata0: on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0: stat0=0xd0 err=0xd0 lsb=0xd0 msb=0xd0 ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=50 stat1=00 devices=0x1 ata0: [MPSAFE] ata1: on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=03 ostat0=51 ostat1=00 ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb ata1: stat1=0x00 err=0x00 lsb=0x14 msb=0xeb ata1: reset tp2 stat0=00 stat1=00 devices=0x4 ata1: [MPSAFE] uhci0: port 0x10c0-0x10df irq 19 at device 31.2 on pci0 uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x10c0 uhci0: [GIANT-LOCKED] usb0: on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered pci0: at device 31.3 (no driver attached) pci0: at device 31.5 (no driver attached) acpi_button0: on acpi0 speaker0: port 0x61 on acpi0 atkbdc0: port 0x60,0x64 irq 1 on acpi0 atkbd0: irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0067 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 atkbd0: [GIANT-LOCKED] psm0: unable to allocate IRQ psmcpnp0: irq 12 on acpi0 psm0: current command byte:0067 psm0: failed to reset the aux device. fdc0: port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: ic_type 90 part_id 73 fdc0: [MPSAFE] fdc0: [FAST] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 sio0: irq maps: 0xcc21 0xcc31 0xcc21 0xcc21 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A sio1: irq maps: 0xcc21 0xcc29 0xcc21 0xcc21 sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A ppc0: using extended I/O port range ppc0: ECP SPP ECP+EPP SPP ppc0: port 0x378-0x37f,0x778-0x77f irq 7 drq 1 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppbus0: on ppc0 plip0: on ppbus0 plip0: bpf attached lpt0: on ppbus0 lpt0: Interrupt-driven port ppi0: on ppbus0 ex_isa_identify() ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it fdc: fdc0 already exists; skipping it ppc: ppc0 already exists; skipping it sio: sio0 already exists; skipping it sio: sio1 already exists; skipping it pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 pnp_identify: Trying Read_Port at 283 pnp_identify: Trying Read_Port at 2c3 pnp_identify: Trying Read_Port at 303 pnp_identify: Trying Read_Port at 343 pnp_identify: Trying Read_Port at 383 pnp_identify: Trying Read_Port at 3c3 PNP Identify complete unknown: status reg test failed ff Nov 12 21:49:31 builld-jv last message repeated 5 times sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it ahc_isa_probe 0: ioport 0xc00 alloc failed isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices pmtimer0 on isa0 orm0: at iomem 0xc0000-0xc7fff,0xc8000-0xcbfff,0xcc000-0xcd7ff pnpid ORM0000 on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fe0: not probed (disabled) ie0: not probed (disabled) lnc0: not probed (disabled) pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0 pcic1: not probed (disabled) sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 vt0: not probed (disabled) isa_probe_children: probing PnP devices uhub1: vendor 0x0409 product 0x55ab, class 9/0, rev 1.00/1.00, addr 2 uhub1: 4 ports with 4 removable, bus powered ukbd0: Alps Electric M2452, rev 1.00/1.01, addr 3, iclass 3/1 kbd: new array size 4 kbd1 at ukbd0 kbd1: ukbd0, generic (0), config:0x0, flags:0x1d0000 Device configuration finished. procfs registered lapic: Divisor 2, Frequency 49877814 hz Timecounter "TSC" frequency 1995118808 Hz quality -100 Timecounters tick every 1.000 msec splash: image decoder found: daemon_saver lo0: bpf attached (noperiph:sym0:0:-1:-1): SCSI BUS reset delivered. sym0: enabling clock multiplier sym0: Downloading SCSI SCRIPTS. (noperiph:sym1:0:-1:-1): SCSI BUS reset delivered. sym1: enabling clock multiplier sym1: Downloading SCSI SCRIPTS. Status is 0x30000510 cbb0: card inserted: event=0x00000000, state=30000510 pccard0: chip_socket_enable cbb_pcic_socket_enable: cbb0: cbb_power: 5V ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire ad0: setting PIO4 on Intel ICH2 chip ad0: setting UDMA33 on Intel ICH2 chip ad0: 6149MB at ata0-master UDMA33 ad0: 12594960 sectors [13328C/15H/63S] 16 sectors/interrupt 1 depth queue pccard0: read_cis pcib4: pccard0 requested memory range 0xf0200000-0xf03fffff: good cis mem map 0xe933b000 (resource: 0xf0230000) pccard0: CIS tuple chain: CISTPL_DEVICE type=null speed=null 01 02 00 ff CISTPL_DEVICE_A type=eeprom speed=250ns 17 03 41 00 ff CISTPL_MANFID 20 04 92 01 10 07 CISTPL_FUNCID 21 02 06 00 CISTPL_VERS_1 15 31 07 00 53 69 65 72 72 61 20 57 69 72 65 6c 65 73 73 00 41 43 37 37 35 00 45 44 47 45 20 4e 65 74 77 6f 72 6b 20 41 64 61 70 74 65 72 00 52 31 00 ff CISTPL_CONFIG 1a 05 01 03 00 07 73 CISTPL_CFTABLE_ENTRY 1b 09 c1 41 19 01 55 66 30 f8 ff CISTPL_END ff cis mem map e933b000 CISTPL_LINKTARGET expected, code ff observed pccard0: check_cis_quirks pccard0: using CIS quirks for Sierra Wireless, AC775, EDGE Network Adapter, R1 pccard0: CIS version PC Card Standard 7.0 pccard0: CIS info: Sierra Wireless, AC775, EDGE Network Adapter, R1 pccard0: Manufacturer code 0x192, product 0x710 pccard0: function 1: serial port, ccr addr 700 mask 73 pccard0: function 1, config table entry 32: I/O card; irq mask 3fbc; iomask 0, iospace 3f8-3ff; io8 irqlevel pccard0: functions scanning pccard0: Card has 1 functions. pccard_mfc is 0 pccard0: I/O rid 0 start 3f8 end 3ff pcib4: pccard0 requested I/O range 0x3f8-0x3ff: in range pccard0: bus_alloc_resource on 452 failed for SYS_RES_IOPORT pccard0: Allocation failed for cfe 32 cbb_pcic_socket_enable: pccard0: No config entry could be allocated. ad0: Intel check1 failed firewire0: New S400 device ID:000781b200003e69 ad0: Adaptec check1 failed ad0: LSI (v3) check1 failed ad0: LSI (v2) check1 failed ad0: FreeBSD check1 failed ata1-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire acd0: setting PIO4 on Intel ICH2 chip acd0: setting UDMA33 on Intel ICH2 chip acd0: CDROM drive at ata1 as master acd0: read 8268KB/s (8268KB/s), 128KB buffer, UDMA33 acd0: Reads: CDR, CDRW, CDDA stream, packet acd0: Writes: acd0: Audio: play, 255 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc:0 :